Message posted by Joerg (Webmaster) (Member since 10/17/2000) on July 05, 2021 at 11:43:02 PST:
Thanks for the post. I can only echo the thanks to all who contribute to Dreamland Resort and to this forum. As for building an ADSB receiver, it is not as hard as it may seem. There is plenty of information out there, but much of it goes way beyond what you need to know to build a receiver. To feed ADSBExchange, Fligtradar24 and Flightaware: Get a Raspberry Pi, install the ADSBExchange feeder software with OS, then add the Flightaware software and the Flightradar24 software. I use the DPD ADSB Antenna in the attached link.
In Reply to: Re: Thanks! posted by RocketRanch on July 04, 2021 at 23:00:17 PST:
Replies: